TESTING, REPAIRS and REFUBRISHING of the components and products mentioned bellow, realized by our company. If you are interested, please don’t hesitate to contact us.
Switching relay boxes: KR-25, KR-40, KR-40-1S,KR-45, KR-45-1S, KR-45-2S, KR-55, KR-60, KR-65, KR-65-1S
Glass heating temperature contorllers:
RTS-27, RTS-27-1A, RTS-27-3A
Turret collector ring boxes: VKU-330, VKU-330-1, VKU-330-2
Multiplier for optics: BT-6-26, BT-6-26E, BT-2-26, BT-3-26 other
Optical devices: TNPO 170, TNPO 170A, other with heating
Night vision devices:
TKN-1S,TKN-1BS,TKN-1TS,TKN-3,TKH3A, TKN-3B,TPN-22-11,TNP-27-11,TNP-41-11, TNP-79-11,TNP-29-14,TNP1-43,TNP1-43A, TVN-2, TVN
Lighting devices: OU-3G, OU-3GK, L-2G, L-2AG, FG-125
Other devices: 9V351, 9V329, 9V332, 9V119, 9S415, 9P135M / M1
All relay boxes are firstly impedance tested, where the ohmic value of the resistance between the contacts is controlled according to the wiring diagram. After this operation are the circuits of the cabinet tested under load. We testing all electrical power elements under the load. Only then are the boxes disassembled. Realized is cleaning of boxes and connectors, replacement of rubber seals, new coating and final assembly.
The box test is then performed again. Boxes that do not pass the measurement, are mechanically or electrically damaged are excluded from the overhaul/refubrishing process. At the end of the process, a certificate is issued stating the measured parameters. Upon request, it is possible to demonstrate the measurement to the customer on a sample personally or via video records.
We are able to check and test the electrical circuits of most optical devices. We also test night vision devices in a dark-room.